Configure EZTag CE for your Mesa2-GEO

In EZTag CE, you need to indicate the COM port used by the GNSS receiver and its output format. To correctly read the output data coming from your receiver, it is critical to select the correct GNSS driver.

4. Refer to Windows 10 Control Panel > Device Manager > Ports to find out which com port is assigned to your Mesa 2 GNSS receiver.

How to select the COM Port and the GNSS Driver in EZTag CE

1. Start EZTag CE found under the Start menu;

2. Select File > Preferences;

3. Using the arrows or the drop-down list, navigate to the GNSS Setting page;

6. Select the GNSS Driver. For the model Mesa2-GEO, select the driver NMEA; for the Mesa2-GEO-M8T, select the driver Mesa2 - uBlox_M8T;

7. Press ok to exit the Preferences menu.

Article: 000133

Related Products: Product

Last Update: 2017-08-07 18:25:40

Document information

Mesa2-GEO-M8T

Mesa2-GEO

5. Press Port(s): the Serial Port Window opens, select the com port assigned by Windows 10 and click OK.

IMPORTANT: the com port may change after Windows updates, so you might have to modify this setting in the future.