Configure EZField for your XF101 receiver

In EZField, you need to indicate the COM port used by the GNSS receiver and its output format (GNSS driver). In order to post-process your GNSS data, the GNSS receiver MUST be configured to output raw binary observations (rather than NMEA).

4.       Press Port(s), select the COM port = COM2 and press ok;

How to select the COM Port and GNSS Driver in EZField

1.       Start EZField found under the Start (or Start > Programs);

2.       Select File > Preferences;

3.       Using the drop-down list, navigate to the GNSS Setting page;

5.       Select the GNSS Driver = Hemisphere GNSS;

6.       Press ok to exit the Preferences menu.

Article: 000120

Related Products: Product

Last Update: 2016-07-14 18:44:15

Document information